Ford Ranger Platinum Dual Cab (2022+) Centurion Canopy
$8,797.00
Ford Ranger Platinum (2022+)
Need a Hand? Weve Gotcha covered! We are fully mobile installers. Take the hassle out of fitting your new purchase by getting us to do the work for you, Sydney wide.
That’s right, we come to you!
*Requires Ford J-Brace Not Included.
It is a requirement from Ford that any 2022+ Next-Gen Ford Ranger fitted with accessories extending above the Tub, and weighing in excess of 45kg must have Tub reinforcement brackets installed. The J-Brace kits are available to order from Ford and need to be installed for the warranty on the vehicle to be valid.
Description
Ford Ranger Platinum (2022+) Utemaster Centurion Canopy
A “DAY IN THE LIFE” WITH THE CENTURION CANOPY.Busy tradesman, mobile workforces and adventurous Ute owners need tough gear that works for work during the week and recreation during the weekend. Do you struggle with: load capacity, access to the tub, stolen equipment, water damage and gear not lasting the distance? The Centurion Canopy is a premium aluminium canopy that offers superior access, strength and security so you can get stuff done, enjoy life’s adventures. Check out this video to see it in action: |
|
WHAT IS THE UTEMASTER CENTURION CANOPY?Traditionally, Ute Canopies are constructed with fibreglass or ABS plastic. The Utemaster Centurion Canopy is constructed with Aluminium which gives it greater strength. It has a dynamic load rating of 200kg and a static load rating of 600kg when being used with the Cantilever Roof Rack. Because it is so strong, we can maximise access through full-width doors without compromising on the structural integrity of the canopy. Watch out the video for a full product breakdown.
|
|
THE MOST ACCESSIBLE CANOPY IN THE WORLDFinding it hard to reach your tools and equipment through small canopy windows? Wasting time and feel frustrated when trying to access your gear? The Utemaster Centurion Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your tub meaning you can easily reach over and pull your gear out through the side door opening. |
|
SUPERIOR WEATHER PROOFINGTraditional fibreglass weatherproofing systems will leave your gear soaked after a good downpour. The Centurion Canopy doors are fitted with high-quality seals around the whole door to help prevent water and dust from entering the canopy. These seals are designed to be durable and long-lasting in the toughest conditions. The rain channels between the Centurion Canopy’s doors direct water away from the tub ensuring that rain doesn’t accumulate inside the canopy, helping to keep your gear dry. |
|
SECURITYLosing your tools and equipment due to a break-in is not only lost money – this can also have an impact on the time and productivity of the job you are working on. Concealed security latches mean each door is locked on both sides, making it hard to pry open. |
|
INTERNAL LOCKING COVERSOn some products you will see the locking rods exposed, this can be problematic if your load shifts during transport because it can jam the locking mechanism. To prevent this from happening, the Centurion Canopy has lock covers on the inside of the doors, these also provide the canopy with a tidy “finished” look. |
|
OPTIONAL CENTRAL LOCKINGAs an optional extra, you can purchase a Central Locking accessory for the Centurion Canopy. This allows you to lock the canopy using the factory key remote. Please Note: Your canopy can be locked manually using the supplied key. |
|
LED LIGHTING UPGRADE1x LED light comes standard with the Central Locking accessory, which is mounted to the inside of the rear door on the canopy. You have the option to upgrade this by adding another light to each side door. This helps to fully illuminate the tub area and makes it easier to see your gear at nighttime. Part #CANOPY-LED-INTERIOR (2x LEDs, one for each side door) Please Note: This part is designed to connect to the system used for the single light which features in the rear door, it cannot be retrofitted to a canopy without this light. |
|
HEAVY DUTY CONSTRUCTIONFibreglass or ABS canopies can easily crack under stress. Despite being lightweight, if engineered correctly aluminium can achieve a very high strength-to-weight ratio and withstand a significant amount of weight and stress without breaking. This means you can carry much heavier loads than you ever could on a fibreglass or ABS canopy, without going over your Gross Vehicle Mass rating. |
|
SHAPE AND DESIGNEvery Centurion Canopy is model specific and has been designed to match the contours and profile of the vehicle. In addition to this, the Centurion Canopy doors are made up of one aluminium panel which have no external rivets. This not only gives the canopy its stealth appearance but also helps boost its strength. |
|
STANDARD BLACK FINISHIt is a tough coating that is baked onto the canopy during the painting process. This finish is resistant to scratches, chips, fading, and corrosion, ensuring that your canopy will look great for years to come. It also matches the black accents of the vehicle. You may be wondering if the canopy gets hot, it can on the surface but the inside stays cool enough to keep your beer fridge running cold!! |
|
INTERNAL LOAD HEIGHTThe Utemaster Centurion canopy has an inbuilt support frame, and no additional bracing is needed to make it load-bearing meaning the available load height is HUGE. |
|
HIGH-QUALITY DOOR HINGESWhen you purchase a Centurion Canopy you are investing in quality gear. The concealed extrusion hinge runs the full length of the door, matches the Canopy colour and eliminates fasteners piercing the body. This significantly reduces water ingress and improves the longevity of the product. |
|
|
THREE YEAR WARRANTYShould anything go wrong with the product you’ll be pleased to know our friendly team will be available to help you get your gear sorted. All of the products are backed by a 3-year warranty which covers material, manufacturing defects and malfunctions. |
DESIGNED & MANUFACTURED IN-HOUSEUtemaster products are designed and manufactured in our state-of-the-art facility in New Zealand. Everything from Design to comprehensive product testing is completed on-site. This ensured that every product is built to the highest standard and will be able to stand the test against the toughest elements. We also have a warehouse in Sydney where common models will usually be dispatched within three working days. |
|
|
IS IT WORTH THE INVESTMENT?We sometimes get asked why our products cost more than other options on the market… Our products aren’t flat-packed with generic design, they are model-specific and pre-assembled to the highest standard. You are paying for an engineered product that will do exactly what we say it will it’s all the little details we’ve mentioned in this video that make the difference, so don’t skimp on quality… Remember, the bitterness of low quality outlasts the sweetness of low cost! Your money is best invested in quality. |
Make | Model | Year |
---|---|---|
Ford | Ranger | 2022 - 2024 |
Related products
-
GWM Dual Cab Cannon – Standard, L, X (2021-2024)
$4,253.00Add to cart -
Ford F150 SWB Dual Cab XLT-Lariat 2023+ Load-Lid
$4,981.00Add to cart -
Mitsubishi Triton Dual Cab VRX-GLXR-GLX-GSR-GLS-VRXB (2015 – 2023) Load-Lid NO Sports Bars
$4,253.00Add to cart -
Toyota Hilux GR-SR5 Dual Cab (2016-2024) To Suit Factory Sports Bar Load Lid
$5,592.00Add to cart